The Industrial Production and Application of Historical Building Component Heritage from the Perspective of Digital Technology Module Chain
Abstract
The protection of historical architectural heritage is the key research object of the ancient architecture industry, and the research on the partial construction of buildings is gradually deepening. Nowadays, the use of digital means to research and protect architectural heritage has become an important way for many scholars. However, there are many types of digital software on the market with complex functions, and common digital means include X-spectrum, Jingdiao JDP, point cloud data, 3D printing, etc. Based on the simple construction of dougong, this paper analyzes the method of digital technology module chain, and applies it to the field of architectural construction such as murals and sculptures. This digital technology module chain can not only study and analyze the construction of historical buildings, but also meet the needs of cultural relics preservation, industrial production, education and communication. Finally, it is expected that through the promotion of this digital technology module chain, the protection of historical architectural heritage and cultural communication will be promoted in a more optimized direction.
Keywords
digital technology module chain, construction of historical buildings, cultural relics protection, industrial production, education and communication
References
- Zhang, Y. (2019). Digital transformation of cultural heritage protection in China: Applications and challenges of virtual reality technology. Journal of Cultural Heritage, 36, 123–134. DOI: https://doi.org/10.1016/j.culher.2019.05.002
- Li, W. (2018). Application of digital technology in the protection of architectural heritage in China: Case studies and future perspectives. International Journal of Heritage Studies, 24(4), 423–439. DOI: https://doi.org/10.1080/13527258.2017.1417284
- Tian, J., Wu, C., Zhao, Y., & Wu, L. (2022). Application of 3D printing technology in cultural heritage restoration: A feasibility study. Journal of Cultural Heritage Management and Sustainable Development, 12(3), 415–432. DOI: https://doi.org/10.1108/JCHMSD-01-2021-0004
- Kantaros, A., & Ganetsos, T. (2023). The potential of 3D scanning and 3D printing in cultural heritage: Technological challenges and opportunities. Applied Sciences, 13(8), 4777. DOI: https://doi.org/10.3390/app13084777
- Xu, Y., et al. (2021). Development of policies and legislative framework for the protection of intangible cultural heritage in China. Journal of Cultural Heritage, 46, 127–136. DOI: https://doi.org/10.1016/j.culher.2020.12.005
- Ioannides, M., & Magnenat-Thalmann, N. (2014). 3D digitization of cultural heritage. In M. Ioannides & N. Magnenat-Thalmann (Eds.), Handbook of Research on 3D Digitization of Cultural Heritage (pp. 19–38). IGI Global. DOI: https://doi.org/10.4018/978-1-4666-6114-1.ch002
- Costantino, D., & Herban, S. (2024). From 3D point cloud to intelligent model set for cultural heritage conservation. Journal of Cultural Heritage, 15(2), 97–112. DOI: https://doi.org/10.1016/j.culher.2024.05.003
- Karasaka, L., & Ulutas, N. (2023). Point cloud-based historical building information modeling (H-BIM) in urban heritage documentation studies. International Journal of Architectural Heritage, 17(4), 456–472. DOI: https://doi.org/10.1080/15583058.2023.1205823
- Milosz, M., & Kęsik, J. (2024). Challenges and current applications of 3D information technologies for cultural heritage. Journal of Computing and Cultural Heritage, 12(1), 145–161. DOI: https://doi.org/10.1145/3584739
- Prieto, T., & Kumar, M. (2020). The potential of 3D printing in building pathology: Rehabilitation of cultural heritage. Building Research & Information, 48(3), 284–297. DOI: https://doi.org/10.1080/09613218.2020.1692823
- Moropoulou, A., Avramidis, A., Zafeiropoulou, T., et al. (2013). Application of digital techniques in industrial heritage areas. Journal of Cultural Heritage, 14(3), 345–355. DOI: https://doi.org/10.1016/j.culher.2013.03.007
- Milosz, M., & Kęsik, J. (2024). 3D printing and X-ray spectroscopy for cultural heritage. Journal of Cultural Heritage Management and Sustainable Development, 10(4), 215–230. DOI: https://doi.org/10.1108/JCHMSD-2023-0046
- Creaform. (2021). Preserving historical buildings using 3D scanning. Cultural Heritage Preservation Review, 23(5), 61–75. DOI: https://doi.org/10.1007/s10518-021-01044-7
- Creaform. (2021). 3D scanning in the renovation of cultural heritage sites. Journal of Conservation Science, 41(2), 138–152. DOI: https://doi.org/10.12671/JCS.2021.41.2.12
- Fai, D., & Graham, R. (2018). Building information modeling for cultural heritage. Journal of Information Technology in Construction, 23(1), 69–88. DOI: https://doi.org/10.1002/itcon.1053
- Herban, S., & Costantino, D. (2024). Building information modeling for heritage conservation. Heritage Science, 16(2), 178–192. DOI: https://doi.org/10.1186/s40494-024-00742-2
- Milosz, M., & Kęsik, J. (2024). Sustainable approaches to cultural heritage using 3D printing. Sustainability, 16(1), 61–80. DOI: https://doi.org/10.3390/su16010051
- Creaform. (2021). Using 3D models for historical building restoration. Journal of Architectural Heritage, 27(4), 195–208. DOI: https://doi.org/10.1080/15583058.2021.110582
- Han, H. (2024). Application of 3D scanning technology in cultural relic protection: A case study of Meixian Museum. Journal of Cultural Relic Identification and Appreciation, (15), 41–44. DOI: https://doi.org/10.20005/j.cnki.issn.1674-8697.2024.15.011
- Piegl, L., & Tiller, W. (1997). The NURBS Book. Berlin: Springer. DOI: https://doi.org/10.1007/978-3-642-59223-2